EdApp by SafetyCulture

10 Hard hat training courses

We’ve put together ten hard hat training courses to keep your workers informed on the proper use and maintenance of their hard hats and other protective equipment. These courses will empower your workers and help your business comply with regulations on workplace safety.

edapp hard hat training - safety in the workplace
Hard hat training #1

Safety in the Workplace

EdApp's Safety in the Workplace course serves as a customizable template for site safety management training. This hard hat training offers four lessons covering general safety topics. Beginning with an introduction to occupational safety and health, the course addresses common safety issues such as safe lifting, ergonomics, and proper use of personal protective equipment (PPE). This PPE course also gives insights into preventing slips, trips, and falls.

Cost: Free

Created by: EdApp

Scope: Personal protective equipment, slips, trips, and falls, safe lifting

Explore the course

edapp hard hat training - ppe for construction
Hard hat training #2

Personal Protective Equipment (PPE) for Construction

This EdApp course emphasizes the vital role of PPE training compliance in the high-risk environment of a construction site. It introduces various PPE types, with a focus on the correct use of hard hats, a crucial protection measure for workers exposed to falling debris, heavy machinery, impacts, and asbestos inhalation risks. The course also addresses the significance of hearing conservation to prevent hearing loss for construction workers.

Cost: Free

Created by: EdApp

Scope: Types of personal protective equipment, hard hats, hearing conservation

Explore the course

edapp hard hat training - crane safety
Hard hat training #3

Crane Safety

EdApp offers this Crane Safety course to raise awareness among construction workers about potential hazards associated with crane operations. This site safety management training focuses on educating them about the correct procedures for setting up, operating, maneuvering, and inspecting cranes. It also covers strategies for identifying crane hazards and outlines necessary steps to control and minimize safety risks.

Cost: Free

Created by: EdApp

Scope: Preparation for crane operation, setting up a crane, operating a crane

Explore the course

edapp hard hat training - harnessing
Hard hat training #4

Harnessing

EdApp's free Harnessing course gives essential insights into proper harnessing techniques for site safety. The course covers the components of fall arrest systems used in elevated work. These include restraint systems, suspension systems, controlled descent systems, and fixed or portable ladders. It also guides workers on inspecting harnesses for defects and maintaining equipment through proper cleaning and storage.

Cost: Free

Created by: EdApp

Scope: Personal fall arrest system, harness selection, use, inspection, cleaning, maintenance, and storage

Explore the course

ISU hard hat training - osha fall protection
Hard hat training #5

OSHA - Fall Protection

This safety training course is compliant with OSHA standards and recognized by I-CAB. It’s specifically designed for workers engaged in tasks at elevated heights. The course delves into essential topics such as protection plans, anchorage points, body wear, connective devices, and emergency procedures. It also fulfills the classroom component of occupational safety training and incorporates a proficiency checklist for employers to conduct practical evaluations.

Cost: 79 USD

Created by: ISU

Scope: Fall protection, body wear, connective devices, emergency procedures, protection plans

Explore the course 

hard hat training hard hat training - aerial lift training
Hard hat training #6

Aerial Lift Training (MEWP) Online Training

Developed by trainers with over 15 years of hands-on training experience, this online Aerial Lift Training (MEWP) is a comprehensive program with an estimated duration of 2 to 2.5 hours. This training covers both Boom Lifts (3B) and Scissor Lifts (3A), and it has been recently updated to align with the latest ANSI A92 Standards. This guarantees compliance with the safest practices for Mobile Elevating Work Platforms (MEWP).

Cost: 79 USD

Created by: Hard Hat Training

Scope: Pre-shift inspections, machine operations and stability, knowing your work site

Explore the course

edapp hard hat training - excavation and trenching
Hard hat training #7

Excavation and Trenching

This construction safety training program equips workers with the skills to discern between excavations and trenches, guiding them on safe navigation. It emphasizes the varied risks in confined spaces and excavation sites, such as cave-ins and slips, that can lead to potential fatalities. It also explores the significance of protective systems and thorough preplanning, highlighting the use of OSHA-compliant materials and effective safety risk management.

Cost: Free

Created by: EdApp

Scope: Understanding excavation and trenching, site preparation, safety measures, work hazards, preventing excavation collapse

Explore the course

edapp hard hat training - osha for workers
Hard hat training #8 

OSHA for Workers (US only)

In response to the various safety risks in construction work, organizations are tasked to guarantee the well-being of their employees by mitigating hazards and fostering a secure working environment. This EdApp course delves into workers' rights and responsibilities, focusing on aspects such as worker safety, whistleblower protections, and procedures for filing safety hazard complaints in case of protocol breaches.

Cost: Free

Created by: EdApp

Scope: What is OSHA, workers rights and responsibilities, filing a complaint, whistleblower protections, inspection

Explore the course

edapp hard hat training - scaffold safety
Hard hat training #9 

Scaffold Safety

This free construction safety training course is designed to help workers develop the knowledge and skills necessary for safe scaffolding work. The course discusses an overview of scaffold types, including suspended and supported scaffolds. It further explores scaffold access methods, such as ladders and ramps, which are mandated when structures exceed two feet above or below access points. Workers will also gain insights into the fall arrest system and more.

Cost: Free

Created by: EdApp

Scope: Types of scaffolds, access and use, capacity, birdcage scaffolding, ladder beams

Explore the course

edapp hard hat training - handlig power tools
Hard hat training #10 

Handling Power Tools

EdApp's free Handling Power Tools course teaches workers the safe and effective use of various power tools involved in construction work. Recognizing the potential for injuries, ranging from minor abrasions to severe ones such as amputations or fractures, the course stresses the importance of proper handling. It transforms employees into competent workers by imparting essential safety measures and general usage guidelines for power tools.

Cost: Free

Created by: EdApp

Scope: General safety, common injuries

Explore the course

Hard hat training is a critical component of workplace safety. It educates workers about the proper usage and significance of hard hats and other protective equipment in hazardous environments, particularly in construction and industrial settings.

This type of training acts as a proactive measure to safeguard workers from potential injuries caused by falling objects, impacts, or electrical hazards. Employers bear the responsibility to make sure that workers are trained on how and when to use protective equipment.

So, they should deliver comprehensive training programs to reinforce safety protocols and emphasize the importance of fostering a secure working environment for all personnel.

What are the 3 classes of hard hats?

Hard hats are classified into three primary classes based on their level of protection and intended use. These classes are established by the American National Standards Institute (ANSI) and the International Safety Equipment Association (ISEA). The three classes of hard hats are:

  • Class G (General): This class gives protection against impact and penetration. It’s commonly used in the construction industry and other general industrial applications where protection from falling objects and low-voltage electrical hazards (up to 2,200 volts) is required.
  • Class E (Electrical): Designed for electrical applications, Class E hard hats offer additional protection against electrical shocks and burns. They’re rated for higher-voltage electrical hazards (up to 20,000 volts) and are often used by electricians and other workers exposed to high-voltage environments.
  • Class C (Conductive): This class offers limited protection and isn’t intended for electrical work. Class C hard hats don’t offer electrical insulation and are typically used in environments where there‘s no risk of electrical exposure but head protection is still necessary, such as in the construction industry.

Workers should select the appropriate class of hard hat based on the specific hazards they encounter in their work environment to secure effective head protection.

What are the OSHA rules for hard hats?

The Occupational Safety and Health Administration (OSHA) mandates certain rules for the use of hard hats to make sure that workers are safe in any industry.

According to OSHA regulations, employers must provide and require employees to wear hard hats when there’s a potential for head injuries from falling objects, electrical hazards, or other impacts. Hard hats must conform to ANSI standards, and employers are responsible for assessing workplace hazards to determine the appropriate class of hard hat needed.

OSHA also emphasizes the importance of proper maintenance and inspection of hard hats so they remain in good condition without any visible signs of damage. Employers are required to train workers on the proper use, care, and limitations of hard hats in their specific work environments.

Keep your workers safe with hard hat training

In environments where potential head injuries are a concern, such as construction sites or industrial workplaces, hard hat training is a must. This training equips workers with the knowledge to assess and mitigate risks, so they understand the importance of wearing hard hats and other protective equipment and how to use them effectively.

By investing in hard hat safety training and construction safety training software, you’re not only complying with safety regulations but also actively contributing to the well-being of your workers. This proactive approach establishes a culture of safety, where employees feel empowered and equipped to navigate their tasks with confidence and protection.

And the best part? Your team can complete courses anytime, anywhere, on any device.

or book a demo with us today
Privacy|Terms & Conditions|Security| © SC Training 2024