10 Slips, trips, and falls training
We’ve listed the best slips, trips, and falls training for your team to prevent workplace accidents from happening. These courses tackle topics such as OSHA standards, fall protection, and hazard prevention.
1. Slip, Trips, and Falls (for Manufacturing) by SC Training (formerly EdApp)
The second greatest cause of unintentional death globally is a fall accident, and data reveal that two-thirds of fatalities are caused by slips and trips (falls on the same level). Fortunately, slip, trip, and fall hazards in the workplace can be easily avoided with SC Training (formerly EdApp)'s Slips, Trips, and Falls training course.
This course deals with the cause of slips, trips, and falls within a workplace and gives some examples of man-made and environmental hazards. By identifying the common sources of these hazards, your team can be more cautious with their surroundings and be more aware. It also tackles some practical steps they can take when dealing with these hazards and how to manage risks.
Since SC Training (formerly EdApp) courses are accessible on laptops, smartphones, and tablets, your team is free to take this course whenever it suits their schedules.
Cost: Free (up to 10 users)
Scope: Why do slips, trips, and falls happen, practical steps for prevention, managing risks
Created by SC Training (formerly EdApp)
Explore the course
2. Slips, Trips and Falls in Retail by SC Training (formerly EdApp)
If you’re looking for a more retail-specific hazard communication training course, SC Training (formerly EdApp) also offers one in their course library.
This Slips, Trips, and Falls in Retail training goes over the details of how accidents happen in a retail setting. It lists some examples of how they occur in retail such as misuse of a ladder, weather conditions outside a store, and not leaving a marker for slippery surfaces, among others.
The housekeeper training course also discusses some housekeeping measures your staff can take to prevent falls from happening in the workplace. By the end of this course, your team will not only know how to handle hazardous areas in your store, but also take measures to prevent them from happening.
Cost: Free (up to 10 users)
Scope: How accidents happen, housekeeping, preventing falls, avoiding slips, trips, and falls
Created by SC Training (formerly EdApp)
Explore the course
3. Ergonomics (for Manufacturing) by SC Training (formerly EdApp)
Knowing the proper way to handle equipment can go a long way in avoiding accidents in the workplace. SC Training (formerly EdApp)’s Ergonomics (for Manufacturing) will teach your staff how to do just that.
This slips, trips, and falls training takes your team through an overview of the benefits of ergonomics and common risk factors. It also identifies potential injuries caused by a lack of ergonomic training, such as muscle sprains, tendonitis, spine disorders, and other musculoskeletal problems.
This safety talk idea also highlights the best ergonomic measures, such as stretching and using proper lifting methods, which can help to avoid accidents before they happen.
Cost: Free (up to 10 users)
Scope: Benefits of ergonomics for manufacturing, risk factors, stretching techniques
Created by SC Training (formerly EdApp)
Explore the course
4. OSHA Focus Four Hazards | Fall Hazards by SC Training (formerly EdApp)
Falls from great heights are the major cause of death in the construction industry. SC Training (formerly EdApp)'s Fall Hazards course will help your team better grasp the criteria of the Fall Protection in Construction standard and the reasons for them.
The safety learning tool’s course quickly discusses the measures your workers can take to prevent themselves and others from falling. It highlights the proper use of guard rails, safety nets, and other personal fall arrest systems. They’ll also tackle safe ladder use and the basics of scaffold safety.
Cost: Free (up to 10 users)
Scope: Preventing falls, guardrails, safety nets, personal fall arrest systems
Created by SC Training (formerly EdApp)
Explore the course
5. OSHA Focus Four Hazards | Caught In or Between Hazards by SC Training (formerly EdApp)
Employees in the construction or manufacturing industries are in danger of being caught in or between hazards. This can happen when your worker slips, trips, or falls. SC Training (formerly EdApp)'s second OSHA Focus Four Hazards, Caught In or Between Hazards, will identify these risks and discuss how to defend against them.
It goes over the different hazards that could happen at any time during work, as well as the safety and precautions they can take against those hazards. It then explains their leader's obligations for employee safety to help them understand their rights should they get into an accident at work.
Cost: Free (up to 10 users)
Scope: Caught-in or in-between hazards, protection against hazards, employer responsibilities
Created by SC Training (formerly EdApp)
Explore the courseExplore our library including slips, trips, and falls training
6. Manual Handling by SC Training (formerly EdApp)
Every distributor should be skilled in manual handling, especially if they're in charge of storing, packaging, and managing big commodities. By enrolling them in SC Training (formerly EdApp)'s Manual Handling course, you can protect them from frequent injuries and mishaps.
This slips, trips, and falls training begins with a lecture on power zones, or the body parts that can lift the most weight with the least amount of effort. It also discusses what's deemed as bad handling and how it might lead to various musculoskeletal injuries.
Then, there's an in-depth look at several handling techniques, including the power lift, half-kneeling, golfer's lift, and tripod lift. The lesson additionally includes some pointers on how to properly warm up and stretch, which will help your workers avoid injuries.
Cost: Free (up to 10 users)
Scope: Power zones, bad handling and its repercussions, handling practices, warming up and stretching to avoid injuries
Created by SC Training (formerly EdApp)
Explore the course
7. Fall Prevention (US)
SC Training (formerly EdApp)'s fall prevention course equips your construction employees with the required safety information to prevent accidents such as falling on the job. This course introduces them to fall prevention systems, ladders, roofing, and scaffolding safety.
Learners will also study the common cases of onsite faulty equipment. This course is fully editable, so if there's some information you'd like to add, feel free to customize it however you like.
Cost: Free (up to 10 users)
Scope
- Fall Prevention Introduction
- Ladder Safety
- Scaffolding
- Roofing Safety
- Common cases of faulty equipment
Created by SC Training (formerly EdApp)
Explore the course
8. Scaffold Safety by SC Training (formerly EdApp)
This SC Training (formerly EdApp) training equips your workers with all the scaffolding knowledge and safety procedures they need to prevent slips, trips, and falls. Learners will become acquainted with the many types of scaffolds and the appropriate type for use based on the building being constructed.
It also goes over the various forms of scaffolding access, such as ladders and ramps, which are required when scaffolds are more than two feet higher or lower than a point of access. Learners will be able to safeguard themselves and others from scaffold-related accidents at the end of this course.
Cost: Free (up to 10 users)
Scope: Scaffolding kinds, scaffolding access types, and scaffolding loads
Created by SC Training (formerly EdApp)
Explore the course
9. Ladder Safety (for Manufacturing) by SC Training (formerly EdApp)
Your employees will learn how to operate ladders safely by taking SC Training (formerly EdApp)'s Ladder Safety training course. It has two short but helpful lessons. The first lesson will teach them how to do pre-checks on the ladder and where they'll need to use it. The second will then offer practical advice on how to operate a ladder appropriately and safely.
Although this training is quick, the information your employees will learn from it will give them confidence in using ladders at work.
Cost: Free (up to 10 users)
Scope: Implementing pre-checks, ladder safety techniques
Created by SC Training (formerly EdApp)
Explore the course
10. Warehouse Safety by SC Training (formerly EdApp)
Warehouses are workplaces that often have a significant risk of accidents and hazards due to the presence of various products and equipment. SC Training (formerly EdApp)'s Warehouse Safety Course begins by discussing personal protection equipment, which acts as a worker's "armor" to protect them from industrial injuries and mishaps.
It then looks into workplace ergonomics and appropriate housekeeping practices to guarantee that everyone has a safe working environment. This course also educates your employees on how to use equipment properly to keep the warehouse supplies in excellent shape.
Cost: Free (up to 10 users)
Scope: Personal safety equipment, ergonomics in the workplace, operations at the warehouse
Created by SC Training (formerly EdApp)
Explore the courseMinimize workplace accidents with slips, trips, and falls training
Accidents at the workplace can cause harm to your organization. Slips and trips hazards can result in injuries or fatalities for employees, which can have a devastating impact on their lives and the lives of their families. This can also lead to lost productivity, increased workers' compensation costs, and potential legal liabilities for the organization.
Additionally, workplace accidents can damage an organization's reputation and erode the trust of customers, investors, and other stakeholders. That’s why having your team take OSHA slips, trips, and falls training courses is important. These courses will not only prevent those unintended consequences from happening but also promote a safer work environment for everyone.